YITIAN NEWS
31
2022
-
05
How to install the quality shower enclosure
Author:
1. Prepare the tools for installing the quality shower enclosure.
2. Install the bottom basin: Combine the bottom basin parts, adjust the bottom basin level, and ensure that there is no water in the basin and the bottom of the basin. The hose can be extended and retracted with the distance to firmly connect the basin bottom and the floor drain.
3. Test and protection: After installation, a water test is required to ensure that the water in the quality shower enclosure is unobstructed.
4. Positioning and drilling: Use a pencil and a level to determine the drilling position of the aluminum material against the wall, and use an impact drill to punch.
5. Install the aluminum material: Knock in the rubber particles at the drilled hole, and lock the aluminum strip to the wall with screws.
6. Fix the glass: Clamp the glass and lock it at the drilled hole in the bottom basin, and then fix it with screws.
7. Install the jacking pipe: find the corresponding position above the fixed glass to drill holes, install the fixing seat and connect the jacking pipe. Secure it to the top of the glass with an elbow sleeve.
8. Install the shelf: install the shelf at the correct position, tighten the nut of the laminate, fix the glass of the laminate, and keep it vertical and horizontal. Note that waterproofing is done under the aluminum that holds the glass.
9. Install the movable door of the quality shower enclosure: install the hardware of the movable door, and install the hinge at the reserved hole of the fixed door. After installation, adjust the position of the axis of the lotus leaf until the door feels the best when closing.
10. Make the quality shower enclosure waterproof: install suction strips or water-retaining strips on the side or under the glass as required. Use silicone to seal the joints between aluminum and wall, glass and bottom basin.
11. Debugging and tightening: Check whether each part is comfortable and smooth to use, and adjust it in time if any problem is found. After adjustment, tighten the corresponding screws to make the entire quality shower enclosure more solid.
12. Finishing work: clip the decorative aluminum strips into the wall-mounted aluminum material to ensure its appearance is neat and generous. Finally, wipe the entire quality shower enclosure clean with a rag.
Related News
Contact Us
E-mail: panqingshan@bathroom-line.com
Tel：+86-0574-87194928
FAX：+86-0574-87190864
Mobile：+86-13819820030
Skype：panqingshan2008
wechat：pan13819820030, +86-13819820030
Copyright © 2022 Ningbo Yitian Sanitary Ware Manufacturing Co.,Ltd. All rights reserved. Powered by www.300.cn SEO Business